When looking above the rear tire up in the fender well, there is a square plate (?) with a bolt/nut in the center. Drivers side looks great but pass side is rusted and falling apart. I have included a pic as I have no idea what it is and what purpose it serves. Any insight is much appreciated.
Thanks Morgan
1989 Dodge Raider 1995 Toyota Landcruiser 1975 BMW 2002
Re: Help a Monty newby identify what this is??
[Re: autobon7]
#104821106/19/1204:46 AM
What year and model mitsu 4x4? Should add that to your signature. <img src="/forums/images/graemlins/kewl.gif" alt="" />
Off Roader 98 Montero with the Winter Package 89 Montero minty clean and reserved for overlanding trips or Cars and Coffee events 96SR (3.15:1 xcase, 35's) gone to the rust gods 96SR Build Up Thread Old web page Old web page
Re: Help a Monty newby identify what this is??
[Re: off-roader]
#104821206/19/1205:19 AM
Gen I swb had those plates in the wheelwells... my 88's were the first place to rust through. If I remember right, they were reinforcement points for rear shoulder belts?
Ray is right though ... year/make/model at the very least will help.
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
