|
|
|
|
my new raider (need help for parts source on 4d55)
#1048391
06/23/12 05:30 AM
|
Joined: Sep 2006
Posts: 297
OP
Mudrunner
|
so i am going to be getting me a new raider with a 4d55 but needs some work most likly rings are bad. i can find most parts i need. but pistons and rings seem to be tough. all help would be nice. <img src="/forums/images/graemlins/cheers.gif" alt="" />
Last edited by goobuds; 06/26/12 01:14 AM.
owned a few .. current 86 rustbucket 2.5td . manual hubs
|
|
Re: need help for parts source on 4d55
[Re: goobuds]
#1048392
06/23/12 09:57 PM
|
Joined: Jul 2001
Posts: 3,169
Roll Me Over
|
I've seen some on eBay but have no idea on quality. I have an '86 4D55T but it's never been rebuilt. You might be better off contacting a UK vendor through POCUK since they are more common over there. (as long as the 4D56 parts are compatible)
-Pmontero
|
|
Re: need help for parts source on 4d55
[Re: pmontero]
#1048393
06/25/12 11:07 PM
|
Joined: Sep 2006
Posts: 297
OP
Mudrunner
|
well i have found some at northernautoparts.com the have a set of rings something like $120 and they also offer piston and rings for 50.40 each. so looking at 200 for that set. i hope i am jumping the gun. i have not got it to my garage yet. so first i need to check compression, check fuel injectors. the basics first. i got it from a friend. who says it was running fine after he had the motor installed drove a few hundred miles and then it would not start. he had Manuel hubs, duel bounce seat and a rear lsd installed as well, dark blue sitting on factor alum rims. ill get some pics posted here later
owned a few .. current 86 rustbucket 2.5td . manual hubs
|
|
Re: need help for parts source on 4d55
[Re: goobuds]
#1048394
06/25/12 11:19 PM
|
Joined: Apr 2004
Posts: 448
Mudrunner
|
Ah that's the rig that was for sale on CL last week in Seattle. I wanted to buy but know nothing about diesels.
If you need any help turning wrenches let me know. Would like to see the rig sometime.
~ Jon
95 Montero SR 33 x 12.50 Aussie Locker OME Heavy Duty Coils & Torsion Bars ARB Front Bumper 76" Trail Gear Rock Sliders XRC-9.5K Winch
|
|
Re: need help for parts source on 4d55
[Re: jdavis]
#1048395
06/26/12 01:07 AM
|
Joined: Sep 2006
Posts: 297
OP
Mudrunner
|
it is the one and the same. the owner i got it from has a few of them hes got a pajero with the 2.5 and a coverted montero with the 2.3. ill be taking it to my dads some time. out spanaway,gram area. its still out in oly. run some test. and find out if i need to tear it apart not a lot differnt from gas to diesel. haha i know parts cost more. and some are really hard to find for the 4d55. but 23-28 mpg sounds good. well thats what i hope fore. better then my 2.6 witch i think i got 18.8 when i checked today. may be a all time high. the guy marty is actuly on the fourm goes by seattleradiers or something. this is for u if you read this marty <img src="/forums/images/graemlins/cheers.gif" alt="" />.
Last edited by goobuds; 06/26/12 01:12 AM.
owned a few .. current 86 rustbucket 2.5td . manual hubs
|
|
Re: need help for parts source on 4d55
[Re: goobuds]
#1048396
06/26/12 01:22 AM
|
Joined: Sep 2006
Posts: 297
OP
Mudrunner
|
pics of new toy 87 raider 2.3 td (4d55t) will add better pics and some of motor when it actually gets home. ![[Linked Image]](http://i961.photobucket.com/albums/ae95/ipjkcu/dodgeraider2.jpg)
owned a few .. current 86 rustbucket 2.5td . manual hubs
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.003s) Memory: 0.6109 MB (Peak: 0.6819 MB) Data Comp: Off Server Time: 2026-05-25 14:32:27 UTCValid HTML 5 and Valid CSS