Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Windshield washer nozzle location dif for dif years? #1048857 07/07/12 09:14 PM
Joined: Apr 2012
Posts: 24
A
autobon7 Offline OP
Need a Spot
Went to the yard in search of a hood to replace the hail pounded hood on my 89 and found a straight no rust hood from a 87. However it has no holes for the nozzles. Where are they supposed to be located? The guy I bought my 89 from had installed 2 mini fake hood scoopes that I removed ASAP and it had 2 holes under the scoopes but no hose and no squirters hooked up. So where are they supposed to be?


1989 Dodge Raider
1995 Toyota Landcruiser
1975 BMW 2002
Re: Windshield washer nozzle location dif for dif years? [Re: autobon7] #1048858 07/07/12 10:10 PM
Joined: May 2007
Posts: 4,628
hazy_daze Offline
Roll Me Over
*****
In my 91, they're in the cowl vents. They're recessed and mount to the firewall, so they're not visible from straight on.


Fasteddy's advice is occasionally sound...
Re: Windshield washer nozzle location dif for dif years? [Re: autobon7] #1048859 07/08/12 11:50 AM
Joined: Nov 2011
Posts: 218
METALMOVER Offline
Wheeler
Yep, my 89 has them recessed into the cowl, there just a little piece of metal tubing with a bend in them which must make them clog up, hopefully yours are still there.... or its back to the yard. Good luck. METALMOVER


1987 Raider,2.6,mt,78"Meyer snow plow,100lb. Doberman alarm,weber carb, lockouts from here- 1989 V-6,SWB, A.T. 4x4, 31'S







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5948 MB (Peak: 0.6479 MB) Data Comp: Off Server Time: 2026-06-21 19:02:33 UTC
Valid HTML 5 and Valid CSS