Raider/Monty mirror & int

niceautoguy Offline

Need a Spot

Looking for inside rear view mirror and side panels for rear area SWB. Tan color.

Thanks.

Re: Raider/Monty mirror & int [Re: niceautoguy] #1049547 07/29/12 09:07 PM

Joined: Feb 2005

Posts: 7,458

Trail Leader

Which panels? Plastic pieces or vinyl covered hard board?

1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya

Re: Raider/Monty mirror & int [Re: rxinhed] #1049548 08/24/12 10:09 PM

Joined: Dec 2011

Posts: 9

niceautoguy Offline

Need a Spot

vinyl covered hard board. Thanks.

Re: Raider/Monty mirror & int [Re: niceautoguy] #1049549 08/25/12 01:02 AM

Joined: Feb 2005

Posts: 7,458

Trail Leader

I have some in a parts car, but I'll have to ascertain their condition. If someone else jumps in on this, may be well enough, too.

Re: Raider/Monty mirror & int [Re: rxinhed] #1049550 08/30/12 01:19 AM

Joined: Dec 2011

Posts: 9

niceautoguy Offline

Need a Spot

thanks for looking. I could use a window crank too.

Re: Raider/Monty mirror & int [Re: niceautoguy] #1049551 08/30/12 02:44 AM

Joined: Feb 2005

Posts: 7,458

Trail Leader

Sold the only window cranks I had left. My parts car for these parts is a stripper early 1986 model. The tan vinyl panels appear to be 5 or 6 of 10s in overall condition. The vinyl is simple unpatterned, no traces of heat pressing or rolling lines. Camera is at work, so I won't be able to post pics until tomorrow.

This was condition in '10 when I bought the truck, no wear since:
[Linked Image]

Russell

1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya

Re: Raider/Monty mirror & int [Re: rxinhed] #1049552 09/04/12 11:51 PM

Joined: Jun 2012

Posts: 36

Alabama

gavin

Getting the Wheeling Fever

if he doesnt buy these i need them also on each side along with the door panels for both front and the back mine were in terrible condition when i bought it <img src="/forums/images/graemlins/frown.gif" alt="" />

88 dodge raider 2.6l

Re: Raider/Monty mirror & int [Re: rxinhed] #1049553 09/06/12 11:58 PM

Joined: Dec 2011

Posts: 9

niceautoguy Offline

Need a Spot

Thanks so much for checking. I can make some that would be about like that. Was hoping for the embossed type. Hopefully you and Gavin can make a deal. Last item though, small "knob" for the sliding controls on the h/ac? The type the light shows thru at night? No luck with inside mirror?

Re: Raider/Monty mirror & int [Re: niceautoguy] #1049554 09/07/12 03:11 AM

Joined: Jun 2012

Posts: 36

Alabama

gavin

Getting the Wheeling Fever

http://www.ritewayautosalvage.com/ junkyard here in bama they have complete interior from what i know but their wanting 100$ a door just for the panels but they would probably have the mirror you are looking for

88 dodge raider 2.6l

Re: Raider/Monty mirror & int [Re: niceautoguy] #1049555 09/07/12 06:06 AM

Joined: Feb 2005

Posts: 7,458