|
|
|
|
 need help ASAP! exhaust pipe diameter
#99039
11/01/02 11:47 PM
|
Joined: Aug 2002
Posts: 81
OP
Getting the Wheeling Fever
|
well, i ordered a dynomax muffler (#17747) and monza tip last week and i took them into a shop to get installed today. as people probably already know, these have a 2.25" diameter. well, the exhaust place said that i have 2.5" piping stock... is this weird? so, basically, i have the wrong size muffler/tip. anyone need them before i just send them back and exchange them? any other advice? help! thanks,
wally
p.s. i *thought* i had done my research on these... i searched and came across many posts where people had bought this specific combo. do i have a rogue exhaust system?
<small>[ November 03, 2002, 12:42 AM: Message edited by: Wallstrum ]</small>
_ _ ___________________________________ _ _
'98 4Runner SR5 V6 4x4 5-Speed
'91 Pickup
|
|
 Re: need help ASAP! exhaust pipe diameter
#99040
11/02/02 03:16 AM
|
|
Anonymous
Unregistered
|
Wally, Just an idea here....
Post what year 4Runner you have next time. It helps the rest of us figure out if you have a fluke truck or not.
|
|
|
Re: need help ASAP! exhaust pipe diameter
#99041
11/02/02 03:21 AM
|
Joined: Jan 2001
Posts: 11,595
Forum Moderator
|
His profile says he has a 98. But is it v6 or 4cy?
When I did the exhaust on my 96, the stock pipes were just a little smaller than 2.25", so they flared them out to match the 2.25" inlet and outlet of my Vortex muffler. You should have the same size pipes if yours is a stock V6 setup.
|
|
|
Re: need help ASAP! exhaust pipe diameter
#99042
11/02/02 04:13 AM
|
Joined: Aug 2002
Posts: 81
OP
Getting the Wheeling Fever
|
sorry - '98 sr5 v6 4x4 5-speed.
_ _ ___________________________________ _ _
'98 4Runner SR5 V6 4x4 5-Speed
'91 Pickup
|
|
|
Re: need help ASAP! exhaust pipe diameter
#99043
11/03/02 06:40 AM
|
Joined: Aug 2002
Posts: 81
OP
Getting the Wheeling Fever
|
anyone care to help here?
wally
_ _ ___________________________________ _ _
'98 4Runner SR5 V6 4x4 5-Speed
'91 Pickup
|
|
|
Re: need help ASAP! exhaust pipe diameter
#99044
11/03/02 08:07 AM
|
Joined: Aug 2000
Posts: 2,205
Body Damage is Cool
|
I always thought we had a 2.25".
|
|
|
Re: need help ASAP! exhaust pipe diameter
#99045
11/03/02 11:44 AM
|
|
Anonymous
Unregistered
|
I just had my dynomax installed a couple weeks ago. My stock exhaust was 2.25" as well. I would get a different shop to look at it if I were you. Or was there a previous owner who put an aftermarket exhaust on it?
|
|
|
|
|
|
