Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
motor swap #1059813 05/17/13 04:33 PM
Joined: Nov 2010
Posts: 191
B
bingocouple Offline OP
Wheeler
Guys, I am changing out my motor due to a blown head gasket. I cant seem to get the top tranny bolts out on the passenger side. I cant seem to get to them. If I take the intake exhaust off, will that give me the space needed to get them?

Re: motor swap [Re: bingocouple] #1059814 05/17/13 06:09 PM
Joined: Nov 2010
Posts: 191
B
bingocouple Offline OP
Wheeler
ok, I took the intake off and was able to get to the last 2 large bolts. Off to get a cherry picker.


Moderated by  4x4Wire, Axe Man, DamKia 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5852 MB (Peak: 0.6330 MB) Data Comp: Off Server Time: 2026-05-29 23:58:10 UTC
Valid HTML 5 and Valid CSS