Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
oil pump options? #1067122 12/14/13 11:32 PM
Joined: Jul 2007
Posts: 54
M
mitsumonki Offline OP
Getting the Wheeling Fever
Well, I blew the 3.5DOHC in my 95 and just picked up a 03 3.5SOHC.
I thought I could just swap the pumps. Turns out I can't. So now I'm stuck wondering how to keep my oil cooler. I haven't even checked to see if the stock filter housing from the 03 without cooler will fit. Ill have to check tomorrow.
SO any ideas? Better picture is SOHC
[Linked Image]
[Linked Image]

Re: oil pump options? [Re: mitsumonki] #1067123 12/17/13 10:23 PM
Joined: Jul 2007
Posts: 54
M
mitsumonki Offline OP
Getting the Wheeling Fever
Well, It looks like the new filter location is ok. Ill just lose my oil cooler. [Linked Image]
Looks like I need over and inch of clearance. The bolt for the mount isn't even touching the bracket.
[Linked Image]
I guess Ill have to notch out the oil pan and put spacers under the motor mounts.
Any other ideas?








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5866 MB (Peak: 0.6350 MB) Data Comp: Off Server Time: 2026-06-07 04:35:24 UTC
Valid HTML 5 and Valid CSS