|
|
|
|
 how many bushings for rear control arm 1990 lwb
#1072995
07/14/14 03:46 AM
|
Joined: Sep 2013
Posts: 186
OP
Wheeler
|
after the fronts I'm doing the rears ome parts is confusing to me. it looks like i need three bushing per side and they are all the same bushing maybe http://www.oemmitsubishiparts.com/parts/...iagramCallOut=4its docent seem to make sense. anyone replaced these and if so where did you get the bushing.
1990 5sp lwb 274,000 miles 80,000 on new motor
|
|
|
Re: how many bushings for rear control arm 1990 lwb
[Re: 1morebike]
#1072996
07/14/14 03:53 AM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
4 total in the control arms
2 total in the track bar
2 for the sway bar
2 links for the sway bar
|
|
|
Re: how many bushings for rear control arm 1990 lwb
[Re: rxinhed]
#1072997
07/14/14 05:09 AM
|
Joined: Sep 2013
Posts: 186
OP
Wheeler
|
4 total in the control arms
2 total in the track bar
2 for the sway bar
2 links for the sway bar you sure looking at the diagram it looks like two in the rear of each arm and one in the front put they all seem to have the same part number.
1990 5sp lwb 274,000 miles 80,000 on new motor
|
|
|
Re: how many bushings for rear control arm 1990 lwb
[Re: 1morebike]
#1072998
07/14/14 08:55 PM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
...and Ford style bushings on the front of the arms, 2 pieces each side. The circular bushings in the rear of the trailing arm are the same.
|
|
|
Re: how many bushings for rear control arm 1990 lwb
[Re: rxinhed]
#1072999
07/15/14 02:05 AM
|
Joined: Jun 2002
Posts: 6,211
Trail Leader
|
Just to be clear, there are four bushings total for each rear trailing arm, two go in the front: MB809388, total of four required per Montero, and two go in the rear: MR112891, total of four required per Montero. The rear ones have to be pressed in/out.
John B.
'87 Raider 2.6 Turbo Auto, Under Construction
'95 Montero SR, 35x12.5/15 BFG M/T KM-2's, Rock sliders, Qtr panel chop, gas tank lift, 2" BL, Aisins, 5.29s
'95 Pajero Mini
'98 Montero Winter Ed.
'04 Cadillac XLR
'03 Kawasaki ZRX1200R
'60 Ford Falcon 4Dr
|
|
|
Re: how many bushings for rear control arm 1990 lwb
[Re: JohnnyBfromPeoria]
#1073000
07/15/14 04:43 AM
|
Joined: Sep 2013
Posts: 186
OP
Wheeler
|
Just to be clear, there are four bushings total for each rear trailing arm, two go in the front: MB809388, total of four required per Montero, and two go in the rear: MR112891, total of four required per Montero. The rear ones have to be pressed in/out.
John B. thats what i was looking for, so 8 total
1990 5sp lwb 274,000 miles 80,000 on new motor
|
|
|
|
|
|
