|
|
|
|
 Auto Trans id help needed
#1074968
11/03/14 04:08 PM
|
Joined: Dec 2011
Posts: 9
OP
Need a Spot
|
Hi,
Needing some info from the Toyota experts on a project I'm working on.
I'm needing an auto bell housing for a 22r motor to a4od trans. Acquired one but it maybe and I hope is , wrong.
My question, where is the starter on an auto 4x4 w 22r? driver or pass side? The bellhousing I've got has it on the dr side. I need it to be on the pass side and can't find any photos or info to confirm. plenty show the mt with starter on pass.
do I simply have the wrong bellhousing?
Thanks.
David
|
|
|
Re: Auto Trans id help needed
[Re: niceautoguy]
#1074969
11/05/14 03:58 AM
|
Joined: Jan 2003
Posts: 1,355
Body Damage is Cool
|
It's been a while since my pickup was auto, but yes, the starter is on the passenger side for both manual and auto. Exhaust routes down the driver side.
I don't remember if the auto trans had a removable bell housing or not. I have a feeling that they didn't, but it's been a while.
Hope this helps,
Todd
1986 Pickup extracab longbed "Woody edition"
SAS - 33's, 5.29's, lockright rear.
02 IS300 SportCross - my "DD"
94 2wd v6 extracab
04 Outback Wagon- wife's/family car
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5877 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-21 12:23:21 UTCValid HTML 5 and Valid CSS 