Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Forums User List Calendar Active Threads Search Forum Help
Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: 3.0 V6 SOHC head info [Re: haztoys] #1076044 01/07/15 09:49 AM
Joined: Mar 2003
Posts: 2,324
SLO County, CA 93453
K
KrzyDav Offline
Body Damage is Cool
*****
my 2 cents on original question.
In 1992 heads started coming from factory with the snap rings on the exhaust guides. '91 and previous had a TSB that describes cutting tool and snap ring installation. If heads have ever been redone, they will most likely have the snap rings on the aftermarket exhaust guides.
The Steath/Diamante had different cams. Some cams have marks on them,, but the marks change location with each production run on these so I wouldn't trust ANY markings.

dave h.
'89 Raider V6 5spd;Aisin Hubs;; Gen2 LS: frt. brakes, rear coils;U.C.arms;R.trailing arms;idler arm; rear LSD axle w.disc brakes ;2 battery system for Dog's fan; relocated ECU; custom bumpers;J.Baker receiver;Conferr roofrack; t-bar crank.
Re: 3.0 V6 SOHC head info [Re: KrzyDav] #1076045 01/08/15 03:53 AM
Joined: Jun 2002
Posts: 6,211
Apache Junction, AZ
JohnnyBfromPeoria Offline
Trail Leader
*****
Atta boy, Krz. Good, solid info. I'd forgotten that stuff.

John B.
Re: 3.0 V6 SOHC head info [Re: JohnnyBfromPeoria] #1076046 01/08/15 04:45 AM
Joined: Aug 2009
Posts: 989
Prescott AZ
H
haztoys Offline OP
Rock Warrior
Quote
Atta boy, Krz. Good, solid info. I'd forgotten that stuff.

John B.


Ding Ding .. We have a winner .. Info not rumors ...

Part numbers are coming up real crazy to all the 'Dont do it crowd..' As if one was to order a '89' SWB Raider cam one would not get the same cam as a '90 LWB to all Montys to Steath and so on to '02' cam ...So is a 89 SWB cam is not the same as 90 LWB on up cam ..?????...Numbers say..?

Then theres the Sigma and in JDM none USDM cars cam... <img src="/forums/images/graemlins/zombie.gif" alt="" /> <img src="/forums/images/graemlins/zombie.gif" alt="" />...

So not sure what to think ..? You tell me..?

Please do home work before posting ...

I think taking the insides of a later car and installing into a 'V6 SWB' block is an upgrade.. Do to pistons and cams ...(The Sigma is where the power is .I think... <img src="/forums/images/graemlins/confused.gif" alt="" /> ) .. To bad FrankR is not around he has info on SOHC V6 12v HP ..

No one has 'hard' info on making SOHC V6 12v HP ..I have some from a 'time far far away '

I get strange info and have some old school info too ... Will see where I end up ...

(Disclamer is SWB we are dealing with... not LWB ...)

Last edited by haztoys; 01/08/15 05:15 AM.
Re: 3.0 V6 SOHC head info [Re: haztoys] #1076047 03/15/15 03:22 PM
Joined: Aug 2009
Posts: 989
Prescott AZ
H
haztoys Offline OP
Rock Warrior
Good to be home ... I think the places I seem to end up everyones crazy ...

Got the heads off and home ...They look real good ...Car was days from the crusher ...Will see what I end up with on these ...
Re: 3.0 V6 SOHC head info [Re: haztoys] #1076048 03/18/15 04:45 AM
Joined: Feb 2000
Posts: 3,269
So Cal, USA
justice Offline
Roll Me Over
*****
There was a 6G72 engine manual on mitsubishilinks.com at one time that had a breakdown of the cam codes. I dont think the site is up right now though.

99 Gen 2.5, fixing blown head gasket
89 SWB- 33's, ARB Front locker, SR rear locker/axle, SR F brakes, winch, WST Offroad Armor all Around, 2.85 Aussie T-case Gears (SOLD)
Sold: (2) 95 SR's, 86 SWB, 90LWB, 91 LWB
-Can Change a timing belt in my sleep..
Re: 3.0 V6 SOHC head info [Re: justice] #1076049 03/21/15 09:04 AM
Joined: Aug 2009
Posts: 989
Prescott AZ
H
haztoys Offline OP
Rock Warrior
Quote
There was a 6G72 engine manual on mitsubishilinks.com at one time that had a breakdown of the cam codes. I dont think the site is up right now though.


Thanks ..I'll take a look ... Did a little work on numbers and cam and part numbers ... I'm finding a mess of differant cams ... Dont understand where the 'all cams are the same' came from ...? .. <img src="/forums/images/graemlins/confused.gif" alt="" />
Page 2 of 2 1 2

Moderated by  4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed 
Forum Rules · Mark All Read Contact Us · 4x4Wire TrailTalk


4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 16 (0.005s) Memory: 0.6211 MB (Peak: 0.7084 MB) Data Comp: Off Server Time: 2026-05-30 00:13:33 UTC
Valid HTML 5 and Valid CSS