Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Gen 3 heater core #1076676 02/07/15 02:36 AM
Joined: May 2013
Posts: 20
L
lilkia Offline OP
Need a Spot
Has anyone done a heater core in the gen3? Think I have a leak. Hot water dripping out of white plastic pipe in center of firewall dead center behind engine. Im guessing drain for heater box? I dont even know where to start taking it apart. Help!!!!

Re: Gen 3 heater core [Re: lilkia] #1076677 02/11/15 03:25 PM
Joined: Jan 2014
Posts: 295
M
Malykaii Offline
Mudrunner
I no longer have easy access to alldata or shopkey. Next time I'm at my former job I'll try to look up a picture, diagrams, or something for ya.


88 Montero, StarQuest turbo, Kormex 5speed +tuff-pan w/phoenix f. stage2 clutch, 4in lift+33' tires, 4.875 lsd, short-throw shifter, Aisin hubs, SR big brakes, gen2 uca's, elantra alt, and so much more... 16g turbo w/hardpipes + 4.90 locking disk-brake axle soon (maybe lsd or aussie front??)







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.003s) Memory: 0.5881 MB (Peak: 0.6361 MB) Data Comp: Off Server Time: 2026-05-29 22:44:44 UTC
Valid HTML 5 and Valid CSS