4Runner Doors Wired to P.U.

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

4Runner Doors Wired to P.U. #1076753 02/10/15 04:50 AM

Joined: Jan 2007

Posts: 33

Littleton, Colorado

Bevoman

Getting the Wheeling Fever

The doors on my 88 4wd P.U. are badly rusted so a friend gave me the doors from his dead 85 4Runner. Problem - they are all electric (windows and door locks) and no such pigtails on the P.U. wiring harness. What is the simplest way to wire them up to my P.U?

Hook 'Em

Re: 4Runner Doors Wired to P.U. [Re: Bevoman] #1076754 02/18/15 09:33 PM

Joined: Aug 2003

Posts: 2,854

Toronto, Canada

Greg_Canada Offline

Roll Me Over

The easiest way would be to swap the manual parts from yours into the pickup.

if you want to keep the power windows, find a wiring diagram and build yourself a harness, shouldn't be too difficult.

89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim

Re: 4Runner Doors Wired to P.U. [Re: Greg_Canada] #1076755 03/08/15 05:40 AM

Joined: Jan 2007

Posts: 33

Littleton, Colorado

Bevoman

Getting the Wheeling Fever

Thanks!

Hook 'Em

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: