|
|
|
|
 CV Joint removal
#1078173
05/23/15 12:53 AM
|
Joined: May 2015
Posts: 24
OP
Need a Spot
|
Okay,
I got the CV axles out and I removed the torn inner boots
I removed the clip on the outboard side of the inner joint.
But I still can't remove the joint
does anyone know the next step?
I tried getting one of the balls out to start removing the cage but it doesn't seem to flex that far.
Thanks,
this is on my 95 SR
|
|
|
Re: CV Joint removal
[Re: fzj80joe]
#1078174
05/23/15 03:47 PM
|
Joined: Jan 2002
Posts: 6,134
Trail Leader
|
There's a circlip holding the star in place, likely covered in grease.
1999 Montero SAS'd on Kings and stuff
1998 Montero trying to get a V8 Swapped
|
|
|
Re: CV Joint removal
[Re: TOASTY]
#1078175
05/26/15 01:28 AM
|
Joined: May 2015
Posts: 24
OP
Need a Spot
|
Yup, Once I cleaned out more grease I found the second clip. its a wire like clip that goes around the inside perimeter of the cup.
I got them apart. cleaned greased and re booted and everything is back together.
|
|
|
Re: CV Joint removal
[Re: fzj80joe]
#1102647
12/17/16 01:50 AM
|
Joined: Oct 2016
Posts: 7
Need a Spot
|
How do you remove the circlip?
Owner of 1995 Mitsubishi Montero
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6026 MB (Peak: 0.6581 MB) Data Comp: Off Server Time: 2026-05-29 22:36:59 UTCValid HTML 5 and Valid CSS 
