Hi all,

I am in the process of finally fitting my 1 3/8 body lift. The fitting instructions supplied are very vague and are actually for the 3 inch body lift. information and photos available on the web is also very limited.

I am also fitting new upper and lower body mount bushes at the same time.

I have run into a couple of small issues that I have had to fault find and find a solution for. The biggest one been not enough length in the fixed body bolts to secure the body to the chassis after fitting the 1 3/8 spacers. This could be related to fitting new body mount bushes at the same time.

I intend to write a tutorial with photos on how to fit the kit for prosperity and hope it will assist others in the future.

Stay tuned for more.

Cheers, Chris

Last edited by 4runnernomore; 03/06/16 01:32 AM.
97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.