Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Forums User List Calendar Active Threads Search Forum Help
Previous Thread
Next Thread
Print Thread
Rate Thread
89 V6 power steering can be replaced with Gen 2 #1101808 07/21/16 01:45 AM
Joined: Dec 2007
Posts: 2,348
Orange Park, FL
Mudraider Offline OP
Body Damage is Cool
Had my first bad parts with RockAuto.com, actually not with them bUT a rebuilder, A-1 Cardone. Got one, leaked like a sieve, ordered another, sent mine back, got creduted, new one showed up, leaks, same place. Local junkyard got a Gen 2 in, power steering pump was used, little road dirty, and still full. I looked, took it out and looked some more. It looked like a bolt in. BUT, there is one difference. The low pressure hose is different. It has a different fitting that goes in the pump. You need to grab the Gen 2 low pressure fitting, which is just a hose clamp. Only difference that I saw. Hopefully that helps somebody out.
Re: 89 V6 power steering can be replaced with Gen 2 [Re: Mudraider] #1101854 07/30/16 09:09 PM
Joined: Apr 2001
Posts: 683
richmond hill, ontario
F
fhuzz Offline
Rock Warrior
Hey mud raider, awesome workaround!
I'll be trying this soon with one from a 94 SR.
Thanks for the info!

'89 Monty LWB auto, 3rd row seating, 95SR rear + coils, genII UCA's and calipers/rotors, dual bouncies.

Moderated by  4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed 
Forum Rules · Mark All Read Contact Us · 4x4Wire TrailTalk


4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5888 MB (Peak: 0.6377 MB) Data Comp: Off Server Time: 2026-05-29 15:38:35 UTC
Valid HTML 5 and Valid CSS