Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
90 model LWB trailing arms #1104137 01/27/18 02:18 PM
Joined: Jun 2015
Posts: 12
gen1v6raider Offline OP
Need a Spot
Anyone ever replace the bushings in the rear trailing arms on a gen1? Ordered a nolathane bush kit from Austrailia to upgrade from oem. Doesn't look too difficult but just wondered if there were any "surprises" i should look for? Thanks

Re: 90 model LWB trailing arms [Re: gen1v6raider] #1104138 01/27/18 08:18 PM
Joined: Feb 2005
Posts: 7,458
rxinhed Offline
Trail Leader
*****
The rear bushings have long been a fairly straight forward replacement.

1. The two bushing shells on the leading end just slip off.
2. The rear end bushings can normally be pressed out.

[Linked Image]


1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya
Re: 90 model LWB trailing arms [Re: rxinhed] #1104143 01/31/18 10:56 AM
Joined: Jun 2015
Posts: 12
gen1v6raider Offline OP
Need a Spot
many thanks!!








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5935 MB (Peak: 0.6471 MB) Data Comp: Off Server Time: 2026-05-25 14:02:53 UTC
Valid HTML 5 and Valid CSS