Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Starter motor are they serviceable .. #1104295 04/16/18 01:49 PM
Joined: Jul 2007
Posts: 387
4
4runnernomore Offline OP
Mudrunner
Hi everyone,

Are our starter motors serviceable with new brushes etc or are they are a throw away and replace item?

After 20 years and 165000km I had a no start incident on Friday. After checking everything under bonnet and fuse panel with no luck thought I would give the starter motor some loving with the knockometer, fired up straight away.

Had another one today on the way back down the highway after stopping for a coffee and pit stop. Couple of taps this time with the hammer before the Sporty fired up again.

Need reliability as I am travelling 600km for work each week. 2x300 km trips, home to work and back.

Damn Kia reliability you would have thought at least 30 years.

Cheers Chris


97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.
Re: Starter motor are they serviceable .. [Re: 4runnernomore] #1104296 04/17/18 03:14 AM
Joined: Feb 2005
Posts: 7,458
rxinhed Offline
Trail Leader
*****


1987 Raider - Roxy
1988 Mighty Max 2.6L Turbo - Pearl
1997 Mountaineer V8 - Freddy
2000 Excursion V10 - Freya
Re: Starter motor are they serviceable .. [Re: 4runnernomore] #1104297 04/22/18 11:01 AM
Joined: Jul 2007
Posts: 387
4
4runnernomore Offline OP
Mudrunner
So spent the weekend sorting out my starter motor.

Had my mechanic order one in after pricing around and wanting a quality OEM part instead of Chinese rubbish. His pricing was in the middle. For interest the stearlership price was $575 and the part had to be imported form Korea, minimum three week wait.

Spent a couple of hours on Saturday morning with my son pulling the starter out. For those contemplating the job the intake manifold support bracket needs to come out as well. Now There are two types of starter motors 8 tooth and 10 tooth. You guessed it the replacement was the wrong one.

A bit of ringing around and sourced a quality OEM replacement from Repco with the correct tooth count, applied Service discount and score - brand new starter for $150. . It's great having a good relationship withth your local mechaninc, no issues at all with bring back the other starter.

Recieved a call from my sister in law, our nephew was playing a gig intown at one of the local watering holes. So buggar it pack up and head in for a couple of quiet ales, lists to some music and be with good company.

This morning started again to reinstall, no real issues apart fro my meat axes for hands. It is great having a son with small hands. All back to get her and running like a bought one. Sporty turns over so much faster now. Great result.

Apart for a few hours of my time cost was $150 to replace with a new one. If going from go to whoa I reckon it would take on average 4-5 hours for an average Joe to fit up. Spending a few hours under the car with my son and gaining some knowledge, priceless

Cheers Chris


97 Sporty, snorkel, K&N filter,chipped, ext forks, 40mm Dob Springs, KYB struts, 35mm Jeep TJ Springs, RAV 4 OME shocks, Kaiser Locker 5.38 R&P's, 1&3/8 body lift, 245/75 R16 D674's Sports steering wheel, bullbar, extractors & 2 1/4 exhaust engineered.

Moderated by  4x4Wire, Axe Man, DamKia 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5968 MB (Peak: 0.6503 MB) Data Comp: Off Server Time: 2026-05-25 19:00:58 UTC
Valid HTML 5 and Valid CSS