|
|
|
|
Skid plates for 87 Raider
#1105006
05/11/19 03:00 AM
|
Joined: Feb 2019
Posts: 87
OP
Getting the Wheeling Fever
|
I'm looking for Front skid plates for an 87 Raider.
Based on the 89 Raider parts list, I need: MB232296 - PLATE,Under Skid (W Eng. 2600 cc) MB304222 - COVER, Eng. Under (W Eng. 2600 cc 5 Speed)
Anything that fits and functions properly would be great. Don't care if it is aftermarket or OEM.
THANKS!!!
87 GEN1 Raider 5-spd w/ Weber (HAGAR) 87 GEN1 Monty 5-spd stock (LUCKY EDDIE) 88 GEN1 Raider A/T w/ Weber (HELGA) 87 Ford Ranger STX 5-spd 2.9L V6 95 Ford Bronco Eddy Bauer 99 Toyota 4-Runner Limited 3" lift
WELCOME TO MY "USED" CAR LOT
|
|
Re: Skid plates for 87 Raider
[Re: Tuxedo_Ranch]
#1105015
05/14/19 12:30 AM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
There is not much, if any, aftermarket for those parts. All the pieces from the 4-cyl and 6-cyl models are interchangeable.
Better to get the 89-91 V6 front skid for the additional ventilation.
Check your local DIY wrecking yard.
1987 Raider - Roxy 1988 Mighty Max 2.6L Turbo - Pearl 1997 Mountaineer V8 - Freddy 2000 Excursion V10 - Freya
|
|
Re: Skid plates for 87 Raider
[Re: Tuxedo_Ranch]
#1105098
06/17/19 08:50 PM
|
Joined: Feb 2019
Posts: 87
OP
Getting the Wheeling Fever
|
Taken care of, appreciate everyone's help
87 GEN1 Raider 5-spd w/ Weber (HAGAR) 87 GEN1 Monty 5-spd stock (LUCKY EDDIE) 88 GEN1 Raider A/T w/ Weber (HELGA) 87 Ford Ranger STX 5-spd 2.9L V6 95 Ford Bronco Eddy Bauer 99 Toyota 4-Runner Limited 3" lift
WELCOME TO MY "USED" CAR LOT
|
|
Re: Skid plates for 87 Raider
[Re: Tuxedo_Ranch]
#1105105
06/18/19 03:20 AM
|
Joined: Feb 2005
Posts: 7,458
Trail Leader
|
Will be getting your shipping estimate Thursday-ish.
1987 Raider - Roxy 1988 Mighty Max 2.6L Turbo - Pearl 1997 Mountaineer V8 - Freddy 2000 Excursion V10 - Freya
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6010 MB (Peak: 0.6566 MB) Data Comp: Off Server Time: 2026-06-07 11:35:46 UTCValid HTML 5 and Valid CSS