Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Lash Adjuster Replacement #235693 06/19/03 09:22 PM
Joined: Mar 2002
Posts: 398
TrooperMark Offline OP
Mudrunner
I have one lash adjuster that has just gone crazy in the last month or so. I have in the past done the Mobil1 trick and it has worked just not this time. My question...can I get away with only replacing the lash adjusters that are acting up or do I have to replace them all. I have TSB on testing and replacing the lash adjuster but it doesn't say whether I replace all or just one. I know that since I have it opened up I should just replace all but being a recent college grad I don't have any money yet plenty of bills.

Thanks Mark


1995 Trooper LS (OME Coils & 2" spacer, Rancho 9000, Nitto Terra Grappler 34", K&N, ARB Snorkel, Calmini Rear Bumper) In garage (9000 winch, custom S. America winch bumper, Delta Cams, Tera-Low 3.07)
Re: Lash Adjuster Replacement #235694 06/20/03 03:05 PM
Anonymous
Unregistered
I read that same TSB, I concluded that by testing the lifters they were keeping the good ones and replacing any that didn't meet spec. Good Luck.








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.009s Queries: 14 (0.007s) Memory: 0.5853 MB (Peak: 0.6351 MB) Data Comp: Off Server Time: 2026-07-13 15:47:18 UTC
Valid HTML 5 and Valid CSS