|
|
|
|
TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254471
01/09/01 06:31 AM
|
Joined: Nov 2000
Posts: 498
OP
Mudrunner
|
TSB EL010- the actual scans, baby...<P><BR>Hey all,<P>Here is the actual TSB! This problem was driving so crazy that I demanded to see the TSB---and they gave it to me.<P>I had it done---it works like a charm. Now my gauge is accurate.<P>Here is the link to all 4 pages of TSB EL010:<BR> <A HREF="http://photos.yahoo.com/bc/bobykim?d&.intl=us&.flabel=fld2&.src=ph&start=1" TARGET=_blank>http://photos.yahoo.com/bc/bobykim?d&.intl=us&.flabel=fld2&.src=ph&start=1</A> <P>Anybody have scanned pages of other TSBs that plague us? Post em!<P>Good luck!<P>Bob<p>[This message has been edited by bob_99SR5 (edited 08 January 2001).]
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254472
01/08/01 10:12 PM
|
|
Anonymous
Unregistered
|
Thanks a lot Bob. I didn't want to do the TSB because it involves replacing the circuit board (for my VIN at least) and I didn't want to start again with 0000 on the odometer. On page 2, it states that a part can be ordered with the original vehicle mileage restored!! (page 3 also says to "verify that the replacement circuit board has been ordered with the correct vehicle mileage for that vehicle". This is great news, time to get on the case of my local dealer.<BR> Paul
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254473
01/08/01 11:20 PM
|
|
Anonymous
Unregistered
|
Thanks for the scans Bob. My VIN falls into the "replace the fuel sender gauge and suction tube asssemblies" without having to replace the circuit board.<P>When I bought the 4Runner I was moving up from a Honda Accord with great gas mileage. It was always depressing to stomp on the gas after filling up and watch the gauge go down to 3/4. I thought it went with the territory.<BR>I'm ordering the TSB next week.<P>My father did own a Pontiac with a 4 barrel carb that when stomping on the gas you could see the gas gauge needle drop...<P>------------------<BR>*** 1999 Toyota 4Runner SR5 Highlander ***<BR><A HREF="http://mbcf.dfci.harvard.edu/docs/4wd.html" TARGET=_blank> beginning of a 4WD page </A> <BR><A HREF="http://mbcf.dfci.harvard.edu" TARGET=_blank> my lab </A> <BR> paul_morrison@dfci.harvard.edu
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254474
01/09/01 03:34 AM
|
|
Anonymous
Unregistered
|
<BR>Hey Bob--<BR>Thanks a million for that---I had been wrestling with my dealer who just couldn't seem to find out what I was talking about!! One question: did your odometer start over a zero miles?? Or did they program it somehow to reflect actual mileage?<P>Thanks,<BR>Scott in Nashville<BR>99 Limited<BR>97 1500 Vulcan Classic aka Hog Eater<P><BR>
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254475
01/09/01 12:40 PM
|
|
Anonymous
Unregistered
|
Bob<BR>WOW! these pics are awsome, how in the world did you get them?<BR>my local toyota shop would never let me see a copy of these!! <P>great job and thanks a million!<P><BR>------------------<BR><B>'99' Imperial Jade Mica 4runner 'SR5' - 5spd </B><p>[This message has been edited by JoeyZ (edited 04 June 2001).]
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254476
01/09/01 01:01 PM
|
|
Anonymous
Unregistered
|
Darn, I had my 99 done and it reset my miliage back to ZERO and I was pissed! Now that I read that TSB and I could have gotten it replaced with the actual mileage Im really upset.. Does anyone have the TSB ELO10-99 for calabrating the fuel gauge??Who knows if the dealer finished the job correctly and I would like to calabrate it myself.. NOTE: If anyone gets there Runner done and has the circuit board replaced with the actual miliage programed in it let me know please...I will make a trip to the dealer at once
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254477
01/09/01 02:33 PM
|
|
Anonymous
Unregistered
|
Has this problem been addressed in the 01s?? Do any of the 01 owners experience the known fuel gage probs??<P>------------------<BR><B>JRunner<BR>99 Millennium Silver SR5 4x4</B><p>[This message has been edited by JRunner (edited 09 January 2001).]
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254478
04/07/01 04:12 PM
|
Joined: Aug 2000
Posts: 2,205
Body Damage is Cool
|
I wanted to print this just for my records.<BR>I'm getting a "restricted area" error message.<P>Bob, any chance I can get it again?<P>Thanks,<BR>Ziad<P>------------------<BR><A HREF="http://reapur.myip.org" TARGET=_blank>Reapur Manor</A><BR>2000 SR5 Highlander SX, TRD SC, TRD exhaust...
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254479
04/07/01 08:14 PM
|
Joined: Feb 2000
Posts: 4,690
Roll Me Over
|
I get the same "restricted area" error message.<BR>I think something changed at that link over the last couple months.<BR>Jeff<p>[This message has been edited by Jeff the marmot (edited 07 April 2001).]
Jeff 2000 4Runner SR5, supercharger, rear e-locker, ARB front locker, 285/75R16 MT/R's, custom bumpers & skids 2007 Tacoma double cab 4x4 - stock
|
|
Re: TSB EL010- Fuel Gauge Problem- the actual scanned pages
#254480
04/08/01 09:58 PM
|
Joined: Jan 2001
Posts: 1,656
Body Damage is Cool
|
I have a print out from Jan but it isn't very good quality. I'd have to scan it at 300dpi not to loose readability.<P>Here, I took pictures with my digital camera. My scanner is a work. Maybe they are useable like this:<BR> <A HREF="http://www.avictoryhome.com/lars/tsb" TARGET=_blank>http://www.avictoryhome.com/lars/tsb</A> <P>BTW if you use it and show it to Toyota, plese cut off the url source address first. Thanks<P>------------------<BR>Lars<BR> <A HREF="http://www.larsdennert.com" TARGET=_blank>http://www.larsdennert.com</A> <BR><UL TYPE=SQUARE><BR><LI><A HREF="http://www.larsdennert.com/4runner" TARGET=_blank>1999 4Runner SR5 4x4</A><BR><LI><A HREF="http://www.larsdennert.com/4runner/arb" TARGET=_blank>ARB Locker and onboard air</A><BR><LI><A HREF="http://www.larsdennert.com/4runner/breather" TARGET=_blank>Raised axle breathers</A><BR><LI><A HREF="http://www.larsdennert.com/4runner/lift" TARGET=_blank>Daystar lift</A><BR><LI><A HREF="http://www.larsdennert.com/4runner/4runnercd.html" TARGET=_blank>Panasonic CD changer controlled by factory head unit</A><BR><LI>Upgraded factory 6 speaker setup with Pioneer 180W 3way units<BR></UL><p>[This message has been edited by larsdennert (edited 08 April 2001).]
|
|
|
|
|
|