|
|
|
|
 Portland people...
#365787
12/19/03 05:14 AM
|
Joined: Oct 2002
Posts: 66
OP
Getting the Wheeling Fever
|
Can anybody recomend a metal fabrication shop? I don't need anything really fancy, just some steel cut and drilled.
It's just heavier stuff than I have tools for. On the west side preferably. I'm in Hillsboro. Thanks,
jeff
1988 4Runner V-6 Auto, Locked out back, LSD up front, some lift, some tire, and a casual attitude towards body damage.
|
|
|
Re: Portland people...
[Re: dentcollector]
#365788
12/19/03 07:05 AM
|
|
Anonymous
Unregistered
|
There are a number of autobody and machine shops all along TV highway, you should get the Washington county yellow pages and call around.
|
|
|
Re: Portland people...
#365789
12/19/03 05:01 PM
|
|
Anonymous
Unregistered
|
Get a hold of Mark Hawley or anyone of the Cascade Cruisers. Mark I know does fabrication and lots of tube work.
Tony in Healdsburg
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5850 MB (Peak: 0.6394 MB) Data Comp: Off Server Time: 2026-05-25 19:52:33 UTCValid HTML 5 and Valid CSS 
