Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Fender flarers for a 89-95 truck ....recomendations ? #428763 04/03/04 05:30 AM
Joined: Apr 2003
Posts: 319
S
spannky Offline OP
Mudrunner
Looking at the WARN 4x flares but have only seen them in a catalog.I Have used bushwacker flares ,they were ok but I am told the WARN flares are better? Any one have the WARN 4X toyota flares? Can you recomend some other brand?

Re: Fender flarers for a 89-95 truck ....recomendations ? [Re: spannky] #428764 04/03/04 05:54 AM
Anonymous
Unregistered
If you're going to wheel this rig, I wouldn't recommend either. They are both too stiff and easily broken off. I recommend the rubber ones from JC Whitney. Far cheaper and they'll bend if you rub up against something.

Re: Fender flarers for a 89-95 truck ....recomendations ? [Re: spannky] #428765 04/03/04 12:38 PM
Joined: Apr 2002
Posts: 3,568
Snowtoy Offline
Roll Me Over
I would have to disagree. I have had the Warn on my rig for almost ten years now, and they have held up fine. The Warn flares that I have are soft enough that they can take the abuse of a tree or rock every now and then. They have some scratches and a gouge or two in them, but have never cracked. I have seen quite a few of the Bushwacker Cut-outs break though.

The best price I have seen for the Warn's are here:
http://www.gowarn.com/search_result...iption=4x+fender+flares&vSuffix=

You can see them on my truck here in the Mod's folder:
http://f1.pg.photos.yahoo.com/ph/stevegv2/my_photos


More than tread lightly. Leave it like you were never there, nor anyone else.
'90 X-cab 4.88's 33 BFG AT's, rr ARB, Headers, Ignition upgrade, cold air induction.
'91 X-cab 5.29's 315's BFG MT's, rr ARB, custom bumper and flatbed
Re: Fender flarers for a 89-95 truck ....recomendations ? [Re: spannky] #428766 03/02/05 03:15 AM
Anonymous
Unregistered
I have the warn flares on my 1992 Toyota pickup, and i too have to disagree with upindair, in that these flares WILL NOT crack.. I actually wheel my truck hard, hitting saplings, tires rammed into them, etc, and have had no problems whatsoever! They are worth every penny (actually cheaper than the bushwackers from 4wheelparts.com). As for looks, well that's an opinion, but i am happy with them, however, i wish i hadn't painted them...

Re: Fender flarers for a 89-95 truck ....recomendations ? [Re: spannky] #428767 03/02/05 03:47 PM
Joined: Feb 2004
Posts: 290
Kaptain Offline
Mudrunner
I also would go with the ones from JCWhitney ( Rubber Fender Flares )
They have 4 different styles and different widths. They also come in a set of 4 (58" lengths i think) or a roll which is 25'. They seem to be the way to go...


93' Toy xCab
bobbed > 22rEB > w56 > stock duals > SAS > 4.88's > 37's

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.005s) Memory: 0.6016 MB (Peak: 0.6649 MB) Data Comp: Off Server Time: 2026-06-07 03:18:41 UTC
Valid HTML 5 and Valid CSS