Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Torque specs needed! #429431 04/05/04 12:04 AM
Joined: Feb 2004
Posts: 39
D
Dark_Angel Offline OP
Getting the Wheeling Fever
I think I bent a valve, by geeting water into the engine. Not fun, I am in the process of tearing down. Doe anyone have the torque specs for the heads, cam bolt and intake? And any other help would be great. Thanks,


2000 Trooper 4x4, Auto, TOD pretty much stock at the moment.

2001 Camaro Z28, M6, fully loaded and too many mods to list! AKA Dark Angel
Re: Torque specs needed! [Re: Dark_Angel] #429432 04/05/04 02:49 AM
Joined: Apr 2002
Posts: 2,529
Bigpoppax2 Offline
Roll Me Over
If you have the 3.5 I have no idea.

I'm guessing 3.2?? If so they are as follows:

Intake 17 ft-lbs

Cam sprocket DOHC 72 ft-lbs

Head step 1) 21 ft-lbs step 2) 47 ft-lbs

Hope these are what you wanted. They are from Haynes Manual.

Joe


A gun in the hand is better than a cop on the phone.

98 Passport 33's, Supercharged, Calmini Bumper, rockbars, diff drops, Teralows, 4.77's, Aussie and ARB lockers, Safari snorkel, Optima red top.
Re: Torque specs needed! [Re: Bigpoppax2] #429433 04/06/04 02:07 AM
Joined: Feb 2004
Posts: 39
D
Dark_Angel Offline OP
Getting the Wheeling Fever
Unfortunatly it's the 3.5. Thanks though. I also need the cam cap bolts.


2000 Trooper 4x4, Auto, TOD pretty much stock at the moment.

2001 Camaro Z28, M6, fully loaded and too many mods to list! AKA Dark Angel







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.005s) Memory: 0.5930 MB (Peak: 0.6457 MB) Data Comp: Off Server Time: 2026-06-17 12:56:01 UTC
Valid HTML 5 and Valid CSS