|
|
|
|
 I can't get the freakin starter out
#449847
05/13/04 11:19 PM
|
Joined: May 2004
Posts: 17
OP
Need a Spot
|
I have unbolted it and removed the wires but the space is tight...I was wondering if any body had any tricks to get the freakin thing out...sorry for tyhe dumb question but I dont wanna fumble around too much down there...
|
|
|
Re: I can't get the freakin starter out
[Re: troopinn]
#449848
05/13/04 11:21 PM
|
Joined: May 2004
Posts: 17
OP
Need a Spot
|
soory I forgot..it's a 99 trooper with TOD
|
|
|
Re: I can't get the freakin starter out
[Re: troopinn]
#449849
05/14/04 12:26 AM
|
|
Anonymous
Unregistered
|
had to pull the exhaust on mine......
|
|
|
Re: I can't get the freakin starter out
#449850
05/14/04 01:36 AM
|
|
Anonymous
Unregistered
|
Look I don't know about 99, but on my 93 I thought that the exhaust option was the only way to go, but after a few hours of going crazy. if you remove front skid plate and hand over hand the starter fwd it comes out the front. I did it that way. good luck.
Erick
|
|
|
Re: I can't get the freakin starter out
#449851
05/14/04 02:27 AM
|
Joined: May 2004
Posts: 17
OP
Need a Spot
|
thanks guys... I was settled on removing the exhaust tommorow but I will look at the front skid plate again... <img src="/forums/images/graemlins/kewl.gif" alt="" />
|
|
|
Re: I can't get the freakin starter out
[Re: troopinn]
#449852
05/14/04 02:28 AM
|
|
Anonymous
Unregistered
|
You can sneak it out the front, but most that I've done have come out after the exhaust is moved. In my shop we all laugh at the gut that gets stuck doing a starter in a 'Zu. I spray down the exhaust bolts with penetrating oil on mine every time I change the oil. Maybe that way it will come apart easily when/if my starter goes. <img src="/forums/images/graemlins/pfft.gif" alt="" />
|
|
|
Re: I can't get the freakin starter out
[Re: troopinn]
#449853
05/14/04 02:53 AM
|
Joined: Apr 2001
Posts: 185
Wheeler
|
Don't know if this will help of not; I have a '96 Trooper with auto tranny. Look at Misc Photos 2 on the link below. Starter Replacement '96 Trooper Ed
|
|
|
Re: I can't get the freakin starter out
[Re: troopinn]
#449854
05/14/04 03:20 PM
|
Joined: Jun 2003
Posts: 442
Mudrunner
|
I had to pull the exhaust as well.
|
|
|
Re: I can't get the freakin starter out
[Re: Ed C]
#449855
05/14/04 07:14 PM
|
|
Anonymous
Unregistered
|
seems like you could have made the job a bit easier removing the crossmember? The frame won't bend with that removed while it's just sitting static <img src="/forums/images/graemlins/cheers.gif" alt="" />
|
|
|
Re: I can't get the freakin starter out
#449856
05/17/04 04:12 AM
|
Joined: May 2004
Posts: 17
OP
Need a Spot
|
thanks guys, I finished it yesterday...I hope none of you have to do that soon. I ended up removing the exhaust. I tried looking to pass it through the front, but no go...that engine is cramed down there...
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 16 (0.004s) Memory: 0.6257 MB (Peak: 0.7316 MB) Data Comp: Off Server Time: 2026-06-17 01:42:23 UTCValid HTML 5 and Valid CSS 