Some upper A-arm theory to bash around

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Page 2 of 2

Re: Some upper A-arm theory to bash around [Re: bretwalda] #481399 08/07/04 04:14 AM

Joined: Dec 1999

Posts: 2,329

Ohio

Augie

Body Damage is Cool

Phil,

The ball joint bottom out already when you use lower profile bump stop. The reason I move it up is to relieve the working angle of the upper ball joint. The extra space created are just an added bonus. If you bottom out the ball joint too much then it would pop out eventually.

Page 2 of 2

Moderated by 4x4Wire, Macka, Mudraider, off-roader, PHIL_, rxinhed

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.005s Queries: 16 (0.004s) Memory: 0.5906 MB (Peak: 0.6462 MB) Data Comp: Off Server Time: 2026-05-26 04:52:18 UTC
Valid HTML 5 and Valid CSS