Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
steel for hangers #482469 07/31/04 07:53 PM
Joined: Feb 2004
Posts: 18
R
RQF4 Offline OP
Need a Spot
im looking for about a foot of 3.5" x 1/4" square tubing. I have already called a bunch of fabricators and steel shops around Houston and no luck. Supposedly this is a not very common size (3.5" sq.) any suggestions on where to look. this is for spring hangers (chevys) on the rear of my 88 pick-up Thanks -Corey


1988 SR5 x-cab 4x4 w/22-re -mod's- custom cold air intake, red top optima, lo-pro bump stops, thorley header, high flow cat, 2.5 exhaust, dynomax muff, chevy springs, procomp shocks .....
Re: steel for hangers [Re: RQF4] #482470 08/03/04 08:15 AM
Anonymous
Unregistered
online metals

I get alot of small pieces from these guys. There shop is across the street from my work.

C


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.004s) Memory: 0.5862 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-06-20 19:00:08 UTC
Valid HTML 5 and Valid CSS