my buddy just bought a raider with the 3.0v6. it was a front hit and the owner said that it had running problems before it was hit. i am looking for spare parts like the dist, fuel injectors, ecu, sensors, radiator, brackets, a/c condensor, throttle body, ect. i was checking ebay and found this ad fot a gasket set that fits a bunch of cars that have this engine. can i rob parts off of a hyundai? go all the way to the bottom of this page, they are spaced out from the copy and paste. thanks. <img src="/forums/images/graemlins/kewl.gif" alt="" /> <img src="/forums/images/graemlins/kewl.gif" alt="" />This auction is for (1) Full Gasket Set

All major gaskets appear to be present (see pictures)





This Full Gasket Set fits the following engine(s):
Chrysler Car

3.0L 181.1 (2972cc) SOHC V6 (12 Valve) (Mitsubishi Eng.) 1988-96
Dodge Truck

3.0L 181.1 (2972cc) SOHC V6 (12 Valve) (Mitsubishi Eng.) 1987-98


see below, its long.


Hyundai Car

3.0L 2972cc SOHC V6 (12Valve) (Mitsubishi Eng.) 1990-97

Mitsubishi Car

3.0L 2555cc SOHC V6 (12 Valve) 1988-91

Mitsubishi Truck

3.0L 1972cc SOHC V6 (12 Valve) 1989-95

James,

I should have most of what you're looking for in my basement. Look in the Parts for Sale section and search on "blowout" and you'll find my posting. PM me with a list and I'll get back to you on price and availability.

Powell

I also have a complete engine pulled from a running '89 Montero with 130k on it. It's for sale with the engine stand it's sitting on. PM me if you want it.

Powell

thanks guy, but i have $375 credit with the local j-yard from a load of scrap i brought in. i need to use it up.

The Hyundia sonata and Mitsu Diamate SOHC 12 valve models are front wheel drive but have the same block as the conventional rear wheel drive mont. , unlike all the FWD Chry products.

All the Gasket sets I've bought will be for the Caravan/Lebaron setup.
The plenum and manild gasket set will have to come from CarQuest or NAPA seperately. About 22.$$ a set.
Some of the tubes from the waterpump will have different O rings, but the others are in some sets. The EGR gasket won't be there but an individual felpro is avail. If you get it cheap enough it will be worth it . The Head and Exhaust gaskets bought sperately will run you around $100 alone.