|
|
|
|
leveling front of 98 taco 4x4
#513143
10/14/04 12:13 AM
|
Joined: Aug 2003
Posts: 8
OP
Need a Spot
|
i replaced factory shocks and springs(front) with a set of trd bilsteins and progressive coils---my front end seems to be 1/2 an inch lower than my rear(still factory leafs) how am i to solve this or am i measuring wrong--i wonder---any help would be appreciated
|
|
Re: leveling front of 98 taco 4x4
[Re: corndog74]
#513144
10/14/04 03:47 AM
|
Joined: Aug 2003
Posts: 712
Rock Warrior
|
Get with revtek through their web page and call them up. Order just the small spacers that go between the strut assembly and strut tower; they should give you around 1/2 inch lift up front.
John Luttrell 2001 4x4 short cab, 3 inch lift with 33 inch mudders and Powertrax no-slip in the rear
1991 Jeep YJ, 4 inch suspension lift on 33" BFG's
|
|
Re: leveling front of 98 taco 4x4
[Re: corndog74]
#513145
10/15/04 05:55 PM
|
Joined: May 2004
Posts: 142
Wheeler
|
yah, a one inch coil spacer should level it out just right...
01 Taco Double Cab V6 Prerunner
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.5933 MB (Peak: 0.6461 MB) Data Comp: Off Server Time: 2026-06-09 23:20:06 UTCValid HTML 5 and Valid CSS