Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Tightening the alternator belt... #542146 12/23/04 09:22 PM
Joined: Nov 2003
Posts: 167
TeaQue Offline OP
Wheeler
How do I go about doing this? Is the alternator used and the tensioner? How do I get to it? It looks really cramped from the top view..

This is a 97' 3.5 V6

Thanks!


1997 Montero LS
3.5 V6
31x10.5 BFG A/T's
T-bar lift
Optima Yellow Top
Cheap Pilot Fog lights
Re: Tightening the alternator belt... [Re: TeaQue] #542147 12/23/04 10:51 PM
Anonymous
Unregistered
Adjust it from underneath. Remove the lower skidplate, loosen the tensioner lock bolt, then tighten the adjustment as neccesary. Teinstall in reverse. Good Luck!

Joel, CA








4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.025s Queries: 15 (0.022s) Memory: 0.5882 MB (Peak: 0.6373 MB) Data Comp: Off Server Time: 2026-11-20 00:44:35 UTC
Valid HTML 5 and Valid CSS