Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
anyone know if the 3vzfe has a pilot bearing hole? #546439 01/03/05 08:00 PM
Joined: Sep 2003
Posts: 66
W
wave Offline OP
Getting the Wheeling Fever
Just wondering for future reference if all of the 3vzfe motors had the pilot bearing hole or just the manual tranny ones... if there was such a thing in the camry.

Thanks

Anthony

Re: anyone know if the 3vzfe has a pilot bearing hole? [Re: wave] #546440 01/03/05 10:10 PM
Joined: Aug 2003
Posts: 2,854
G
Greg_Canada Offline
Roll Me Over
maybe the crank is the same as the 3vze and you can just swap em out...


89 4Runner
3" BL, M/T locks, 33"bfg mt, bilstein, Kayline, tubebumper, toyotafiberglass panels
TBI: Elocker,3.4 w/ORS,b+b,S2Sstg2cams,arias pistons,P+P intake,TRDs/c,URDpullies+7th,downey headers,MAPECU2,WEGO WB, SupraMAF,walboro255,stg4clutch, EPaOo2 sim

Moderated by  4x4Wire, 52degrees, Adam F, Axe Man, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.005s) Memory: 0.5881 MB (Peak: 0.6358 MB) Data Comp: Off Server Time: 2026-06-20 21:37:04 UTC
Valid HTML 5 and Valid CSS