Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Clutch Backing Plate?? #571847 02/22/05 12:48 AM
Joined: Jan 2004
Posts: 63
R
rmg Offline OP
Getting the Wheeling Fever
Quick question. When I replaced my clutch bracket, I didn't realize that there was a backing plate also. Anyway, I finally ordered that part. My question is: Which side of the firewall is the backing plate installed on? I am assuming on the master cylinder side. Am I correct?

Thanks.


Ryan
95 T100 2WD ExtCab
All Stock
Re: Clutch Backing Plate?? [Re: rmg] #571848 02/22/05 01:16 AM
Joined: Jun 2000
Posts: 204
Bill_R Offline
Wheeler
That is the side I put my bracket on. It just looked like the logical place to put it. If somebody knows different, I hope they will chime in.


Bill Reid
'93 T100 SR5 4X4
'05 4Runner SR5 4x4 (wife's DD)

Moderated by  4x4Wire, Dandeman, ErikB, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5890 MB (Peak: 0.6368 MB) Data Comp: Off Server Time: 2026-06-17 16:40:30 UTC
Valid HTML 5 and Valid CSS