Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
FJ-80 Axle Help *DELETED* #575525 03/02/05 11:08 PM
Joined: Oct 2001
Posts: 926
fpkelly Offline OP
Rock Warrior
Post deleted by fpkelly

Re: FJ-80 Axle Help [Re: fpkelly] #575526 03/03/05 12:15 AM
Joined: Feb 2003
Posts: 339
Johnboy Offline
Mudrunner
I am 90% sure you are wrong. It has something like am 8.4" axle that may or may not be the same one used in T100's, non TRD tacos and Tundras. You can get a E-locking 3rd from a LC but from reading the Slee offroad page, the conversion requires some grinding and welding and that an ARB would be easier.

But it definetly has the beef needed to hold up to 35's.


85 4Runner, 4" lift, bumpers, sliders, locker


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.004s) Memory: 0.5833 MB (Peak: 0.6310 MB) Data Comp: Off Server Time: 2026-05-30 02:30:23 UTC
Valid HTML 5 and Valid CSS