|
|
|
|
 3.0 V6 fuel system copper crush ring gasket kit???
#582545
03/20/05 01:43 AM
|
Joined: Jul 2000
Posts: 1,147
OP
Body Damage is Cool
|
My brother is doing a HG replacement on his Toy and wants to replace all the copper crush gaskets in the fuel system. NWOR sells a kit but would like to avoid 'em if possible. Anybody got part #'s he can use at local parts stores?
|
|
|
Re: 3.0 V6 fuel system copper crush ring gasket kit???
[Re: Buster]
#582546
03/20/05 02:00 AM
|
Joined: Apr 2000
Posts: 4,230
Roll Me Over
|
Call the dealer. If they are a solid copper gasket you can re-anneal them and they will be good as new. To anneal, hang them on a piece of solid wire and heat with a propane torch until they are cherry red, let cool. This will make them dead soft again and they will seal as well as new ones.
David Fritzsche
1990 Ex-Cab V-6,5-speed, with a few mods
04.5 CTD Dodge 2500 Ram--Tow Rig
Roseville, CA
"Serenity through Sobriety"
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.011s Queries: 15 (0.008s) Memory: 0.5867 MB (Peak: 0.6349 MB) Data Comp: Off Server Time: 2026-07-13 14:37:16 UTCValid HTML 5 and Valid CSS 
