Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Page 2 of 2 1 2
Re: Chevy spring swap- I need to vent..... [Re: missouriman] #596819 04/26/05 06:57 PM
Joined: Jan 2001
Posts: 11,595
Adam F Offline
Forum Moderator
Quote

maybe I should go with 2 or 3 inch lift chevies?


That would defeat the whole purpose of this spring swap. The reason why people do this swap is because the springs can be had cheap from a junkyard and they provide good results. If you are going to spend money on aftermarket springs, get some springs from someone like Marlin or Allpro that are designed for your Toyota.


88 4R, 350 V8, R150 5 speed Sold <...uot; />
97 4R, stock, daily driver
98 Sienna, kid and dog hauler, wife's ride
Re: Chevy spring swap- I need to vent..... [Re: missouriman] #596820 04/26/05 09:35 PM
Joined: Oct 2003
Posts: 2,661
J
J94_4runner Offline
Roll Me Over
I went with allpro's. really like'm. easy too.


94runner: Dana 44 SAS, 35's, Lockers, gears, winch, rock rails, bumpers, 3"BL, drivetrain lift, Budbuilt cross member, centerforce clutch and MORE! ***FOR SALE*** $8,500
-1985 Supra (STOCK!) FOR SALE $4,000
www.celicasupra.com
Re: Chevy spring swap- I need to vent..... [Re: J94_4runner] #596821 04/26/05 10:06 PM
Joined: Aug 2004
Posts: 1,298
TexJeff87 Offline OP
Body Damage is Cool
I'm guessing that by the time I finnish with this, including what my time is worth, I could have just bought some AllPro or Marlins and have been done with it.

Oh well, I'm in it now.

In the process of swapping the shocks now...


If Mad Max had a 4runner...
Re: Chevy spring swap- I need to vent..... [Re: TexJeff87] #596822 04/27/05 04:05 AM
Joined: Apr 2002
Posts: 394
Lou Bell Offline
Mudrunner
I am assuming that you had some sort of lift spring or a lift block (or both) or something is definately not right with those springs. My rear chevys lifted the rear of my 4Runner about 3" with the Chevy shackles. Because I did an SAS, the front was about 5" taller. So to compensate in the rear, I made some longer shackles, and I added a 2" lift block.

Last edited by Lou Bell; 04/27/05 04:08 AM.

'87 4runner 37x12.50x15 MTRs
SAS, 4.88's, rear+front e-lockers
4x4Him --- Christian 'wheelin
4x4Him National Forum
Re: Chevy spring swap- I need to vent..... [Re: Lou Bell] #596823 04/27/05 02:11 PM
Joined: Aug 2004
Posts: 1,298
TexJeff87 Offline OP
Body Damage is Cool
I'll take some pics today if I can... maybe they ARE shot.. <img src="/forums/images/graemlins/confused.gif" alt="" />


If Mad Max had a 4runner...
Page 2 of 2 1 2

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.011s Queries: 16 (0.008s) Memory: 0.6114 MB (Peak: 0.6922 MB) Data Comp: Off Server Time: 2026-11-01 22:24:36 UTC
Valid HTML 5 and Valid CSS