Auto tranny bolt up order

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Auto tranny bolt up order #597280 04/27/05 11:15 AM

Joined: Apr 2005

Posts: 58

Tucson, AZ

Wildcat_4R Offline

Getting the Wheeling Fever

I am currently dropping my rebuild 22RE into my 4-Runner (with an A340H tranny). However, I do not remember how the driveplate bolts onto the crankshaft. There is the driveplate, spacer, and spacer washer. What order do these bolt to the crank and does the "dish" of the driveplate face in or out. Any help on the matter would be greatly appreciated. I want to make sure that the 6 bolts in the torque converter go in and there are no clearance issues.

Last edited by Wildcat_4R; 04/27/05 08:23 PM.

1987 4-Runner with a "slightly modified" 22RE

Re: Auto tranny bolt up order [Re: Wildcat_4R] #597281 04/27/05 05:29 PM

Anonymous

Unregistered

Check out the post '93 Toy FSM. It will be in there.

Re: Auto tranny bolt up order #597282 04/27/05 08:45 PM

Joined: Apr 2005

Posts: 58

Tucson, AZ

Wildcat_4R Offline

Getting the Wheeling Fever

Awsome..found it in the FSM. The big spacer goes in between the crank and the driveplate.

1987 4-Runner with a "slightly modified" 22RE

Moderated by 4Crawler, 4x4Wire, kewlynx

Hop To

4x4Wire Social: