|
|
|
|
 Which wire is cold side of stop lamp switch?
#633803
08/06/05 03:28 AM
|
Joined: Sep 2001
Posts: 127
OP
Wheeler
|
I'm installing a brake controller and need to tap into the cold side of the stop lamp switch. Does anyone know which wire that one would be? Here are my choices... Blue, Orange, Green w/ White stripe, Green w/ Yellow stripe.
If someone has done one of these and could share or if someone has a manual and could look it up that'd be great.
It's on my 2000 Trooper 4WD LS.
Thanks,
-Jared
-Jared
'00 Trooper S 4x4; OME 912 Coils; LT265/75/R16 Bridgestone Dueller A/T REVO's (Love'EM!)
|
|
 Re: Which wire is cold side of stop lamp switch?
[Re: UteTroop]
#633804
08/07/05 12:56 AM
|
Joined: Sep 2003
Posts: 1,214
Body Damage is Cool
|
GREEN AND YELLOW IS THE COLD WIRE JERRY
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5875 MB (Peak: 0.6354 MB) Data Comp: Off Server Time: 2026-06-17 11:43:17 UTCValid HTML 5 and Valid CSS 
