Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Auto to Manual Hubs #646516 09/13/05 02:40 AM
Joined: Feb 2005
Posts: 19
1
1tacomaInIt Offline OP
Need a Spot
I'm thinkin of buying a 2003 Tacoma. However I hate the auto locking hubs. I was wondering how hard and how expensive it is to swap them out. Any ideas?????

Peter

Re: Auto to Manual Hubs [Re: 1tacomaInIt] #646517 09/14/05 01:53 AM
Joined: Sep 2002
Posts: 96
BajaTaco Offline
Getting the Wheeling Fever
It is not all that hard if you are mechanically inclined and have tools, but unfortunately it is kind of pricey. Mark In AZ (moderator of this forum) has done it. You can get an idea of cost from these links...

Mark's article

http://www.offroadsolutions.com/technicalarticles/manual_hub_conversion.htm

http://www.parksoffroad.com/tacomamods/orsmanhub/orsmanhub.htm

http://www.sonoransteel.com/junk_yard_manual_hubs.html


Moderated by  4x4Wire, Dandeman, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5891 MB (Peak: 0.6370 MB) Data Comp: Off Server Time: 2026-06-20 19:09:53 UTC
Valid HTML 5 and Valid CSS