|
|
|
|
 96-97 RODEO DOOR PANELS SWAP TO 1ST GEN AMIGO, POSSIBLE?
#660183
10/26/05 11:19 PM
|
Joined: Aug 2004
Posts: 56
OP
Getting the Wheeling Fever
|
Well thatÆs pretty much my question, since IÆm swapping a 01 rodeo sport dash board on my 92 amigo I have to get rid of the amigo panels but the rodeo panels wonÆt fit on the amigo because they are too small and the doors are a lot different. So do you think that the 96-97 rodeo might work?
Thanks for any responses
Sal
~1992 Isuzu Amigo 4x4~
* 3.2L DOCH V6
* 01 Rodeo Dash-board swap
* 32's
* custom roof rack
* custom exhaust
|
|
|
Re: 96-97 RODEO DOOR PANELS SWAP TO 1ST GEN AMIGO, POSSIBLE?
[Re: blackdemon]
#660184
10/26/05 11:49 PM
|
Joined: Apr 2001
Posts: 777
Rock Warrior
|
That's a tough one....they should bolt to the door without too much problem(just the holes possibly being misaligned)..the main problem I see is the dash lines. Not sure how they match up, although they are probably pretty close. Always worth a shot if you can get your hands on some. Love the swap by the way, looks awesome. <img src="/forums/images/graemlins/cheers.gif" alt="" /> Steve
'97 Rodeo
3.2L V6
DOR 3" lift, 3"BL, DOR Boulder Bars, Tera-Low's, 33x10.5,Surco Safari Rack, Cobra CB, Rancho 9000's....andnNow with Half-Doors for the summer
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.008s Queries: 15 (0.006s) Memory: 0.5871 MB (Peak: 0.6353 MB) Data Comp: Off Server Time: 2026-07-13 03:41:00 UTCValid HTML 5 and Valid CSS 
