Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
stock torsion bar adjusting bolt setting #663198 11/04/05 05:38 PM
Joined: Sep 2004
Posts: 44
B
buckgrunter Offline OP
Getting the Wheeling Fever
Anybody have any idea how much bolt thread is exposed past the upper torsion bar nut on a stock 4x4. I just replaced the bolts and nuts and want to set it back in the ballpark of stock height, then adjust for uniformity from there. If I recall right, 14-14.5" from the fender to the upper rim lip is stock but I also have an IFS lift on my truck. Just wondering if we're talking 1", 1.5" of thread, or more, or less.


89' SR5 Pick Em Up
22re W56 3" IFS Lift 33s 4.88s w/ lockrite front
Re: stock torsion bar adjusting bolt setting [Re: buckgrunter] #663199 11/04/05 06:09 PM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.005s Queries: 15 (0.003s) Memory: 0.5884 MB (Peak: 0.6364 MB) Data Comp: Off Server Time: 2026-05-29 18:15:56 UTC
Valid HTML 5 and Valid CSS