taking of hardtop on 2ng gen Amigo

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

taking of hardtop on 2ng gen Amigo #717261 04/19/06 10:24 PM

Joined: Apr 2006

Posts: 21

Southport NC

mtbiker8399 Offline

Need a Spot

where can i disconnect the electric wires running up to the 3rd brake light in the top? should i cut them inside the plastic panel in the back and put in my own disconect clip?

Last edited by mtbiker8399; 04/21/06 05:08 AM.

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.006s Queries: 14 (0.004s) Memory: 0.5816 MB (Peak: 0.6220 MB) Data Comp: Off Server Time: 2026-06-17 01:51:44 UTC
Valid HTML 5 and Valid CSS