Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
87 Bronco II questions #719151 04/26/06 10:06 PM
Joined: Jan 2004
Posts: 906
P
pplotz Offline OP
Rock Warrior
Howdy, I just recently acquired a (new to me) Bronco II. I was wondering if anyone could give a me description of what I should expect and if they had any good links for mods. The only info I have is that it is a 87 4x4 with (if I remember right) the twin I-beam front axle. Also, I don't have a lot of experience with it, is that a good axle to have, I have heard good things about it....

Thanks,

Peter

Re: 87 Bronco II questions [Re: pplotz] #719152 04/27/06 01:09 AM
Joined: Jun 2004
Posts: 1,904
W
wyleone Offline
Body Damage is Cool
The twin I beam is a strong ft suspension, but make sure your U joints and bushings are good, they wear quickly. There are few w/ Bronco IIs on here.

Re: 87 Bronco II questions [Re: wyleone] #719153 04/28/06 02:11 AM
Joined: Jan 2004
Posts: 906
P
pplotz Offline OP
Rock Warrior
Cool, I'll keep an eye on em. Thanks for the heads up.


Moderated by  4x4Wire 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.009s Queries: 15 (0.007s) Memory: 0.5905 MB (Peak: 0.6433 MB) Data Comp: Off Server Time: 2026-07-13 18:20:40 UTC
Valid HTML 5 and Valid CSS