Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
ISC Source? #725042 05/23/06 05:48 PM
Joined: Feb 2005
Posts: 115
S
scaesare Offline OP
Wheeler
Been a while since I've been on the forums.

I'm in need of an ISC (aka IAC) for my 3.5 DHOC. The one promising source (crebotech.com) has not had them in stopck for quite a while, and I'm getting tired of driving two-footed.

Has anybody found a less expensive source for these other than the $300+ that they seem to run online?

Thanks.


-Steve
-1995 Montero SR 3.5L V6 DOHC
Re: ISC Source? [Re: scaesare] #725043 05/23/06 10:37 PM
Joined: Jan 2001
Posts: 13,649
fasteddy Offline
Web Wheeler
*****
Somebody just posted a source a few months ago, about $100 or so, I think. Try a search. Use "isc".


Not responsible for advice not taken...
Re: ISC Source? [Re: fasteddy] #725044 05/24/06 03:58 PM
Joined: Feb 2005
Posts: 509
W
Winston Offline
Rock Warrior
www.rockauto.com Had them at one time.

http://www.foreignecurepair.com/isc.asp should have them too.


'90 Montero XLS (Sold, sadly)
'95 Montero LS 160k
'03 Montero Limited 30k
Re: ISC Source? [Re: Winston] #725045 05/27/06 10:42 PM
Joined: Mar 2004
Posts: 584
TobyB Offline
Rock Warrior
The Rockauto ones are the later, all plastic body-

the coils on the one I had have somewhat higher resisitance,
and weren't working with my ECU. I went back to the metal body version, and life got better.

But your mileage may vary- many people use the (less likely to short) plastic ISC motors without problems!

Toby


'89 V6 4dr- '4- Doris'







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.6034 MB (Peak: 0.6588 MB) Data Comp: Off Server Time: 2026-05-29 15:36:39 UTC
Valid HTML 5 and Valid CSS