MUA-5 tranny; Quadrant Shaft seal

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

MUA-5 tranny; Quadrant Shaft seal #725098 05/23/06 10:10 PM

Joined: Jun 2004

Posts: 15

Austin, TX

gotdurt

Need a Spot

Has anyone replaced the seal in the quadrant box? I'm debating on whether or not to replace the bushings to, but it will be a pain. I'm worried that worn bushings are what damaged the seal to begin with...

So, who's done what, and with what success?

Casey Fry
Leander , TX
94 Trooper (33" BFG muds, home made trail rig)
2000 Amigo (grocery gitter)

http://home.earthlink.net/~cfry129/
www.clfry.com

Moderated by 4x4Wire, houlster, jezeric, Jim_Paget, strawmyers

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.007s Queries: 14 (0.004s) Memory: 0.5845 MB (Peak: 0.6245 MB) Data Comp: Off Server Time: 2026-06-07 06:37:04 UTC
Valid HTML 5 and Valid CSS