Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Smitty Bilt Bumper Install #732255 06/20/06 03:13 AM
Joined: Jun 2006
Posts: 42
C
ClarkGriswold Offline OP
Getting the Wheeling Fever
Hello folks,

First time poster, long time reader....

I bought an off hand SmittyBilt bumper recently but it did not come with the hardware to mount it, no pun intended. I have seen Westin Bumper Mounting kits, can they be substituted? I have not seen Smittybilt hardware sold seperately anywhere. Thanks in advance for your <img src="/forums/images/graemlins/cheers.gif" alt="" /> <img src="/forums/images/graemlins/cheers.gif" alt="" /> thoughts. [email]S@&%ers[/email] full, gotta go........

Re: Smitty Bilt Bumper Install [Re: ClarkGriswold] #732256 06/20/06 03:21 AM
Joined: Jan 2000
Posts: 12,153
4Crawler Offline
Web Wheeler
*****
Not sure what style bumper or year/model vehicle this is for, but the front dual tube Smitty I had on my '85 just mounted to the factory bolt holes up front plus the two front body mount bolts.

Re: Smitty Bilt Bumper Install [Re: ClarkGriswold] #732257 06/20/06 03:26 AM
Joined: Jun 2006
Posts: 42
C
ClarkGriswold Offline OP
Getting the Wheeling Fever
Sorry, I've been enjoying some Molsons. I have a 91 Ext. Cab, 3.0L.(has the factory sunroof :)) The bumer is for the rear and did not come with anything to attach it to the frame. I need to maybe try and figure out how to post some pics.

Re: Smitty Bilt Bumper Install [Re: ClarkGriswold] #732258 06/20/06 04:08 AM
Joined: Oct 2004
Posts: 1,270
willzrunna96 Offline
Body Damage is Cool
try taking just the bumper off and leave the brackets on. put the bumper and mark holes in the bracket (if there wide enough and drill new holes. this worked on my aftermarket bumper with 3inch body lift brackets i made


91 pickup 5.29's US GEAR.35x 12.50 trxus m/t.5 speed swap- SOLD!
96 4Runna limited-toytec/OME lift,diff drop Nitto 285/75/16 Elocked=butter
07 FJ cruiser 3" DR coilovers 285/75/16 nitto TG. allpro sliders
Re: Smitty Bilt Bumper Install [Re: willzrunna96] #732259 06/20/06 04:41 AM
Joined: Jun 2006
Posts: 42
C
ClarkGriswold Offline OP
Getting the Wheeling Fever
I think you're right, though I am going to need some better drill bits. Thanks.

Re: Smitty Bilt Bumper Install [Re: ClarkGriswold] #732260 06/20/06 04:55 PM
Joined: Dec 2004
Posts: 136
P
Paul_H Offline
Wheeler
It's been over 10 years since I put my smitty on my truck, but as I recall, it bolts right on with 4 bolts in place of the stock bumper brackets, and no need to drill. I don't recall if the factory bolts were used or not.


'94 extra-cab 3.0 extra slo (auto tranny) original owner. E/B o/s valve heads and no more crossover. More mods to come.

Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.013s Queries: 15 (0.010s) Memory: 0.6104 MB (Peak: 0.6799 MB) Data Comp: Off Server Time: 2026-11-02 10:00:34 UTC
Valid HTML 5 and Valid CSS