Fuel Injection on a 2.6 Gen 1

4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums

Print Thread

Rate Thread

Fuel Injection on a 2.6 Gen 1 #736696 07/11/06 03:51 AM

Joined: Oct 2004

Posts: 342

Provo, Utah

Racer4

Mudrunner

I just posted a thread in the tech section looking for someone to share the shipping costs for two TPI fuel injection manifolds for a 2.6 that are located in Australia. If you have a desire, check out the details in my recent post.

I need another buyer in the next three days to save a few bucks.

88 Montero with Gen 3 alloys, 31 inch Toyo's, A/T, Dual Bouncy Seats, Midland CB radio, Rebuilding 2.6L . See the details http://www.cardomain.com/memberpage/710921

Moderated by 4x4Wire, 52degrees, Adam F, Axe Man, kewlynx

Hop To

4x4Wire Social:

| 4x4Wire on FaceBook |

OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

PHP: 7.4.33 Page Time: 0.005s Queries: 14 (0.004s) Memory: 0.5828 MB (Peak: 0.6228 MB) Data Comp: Off Server Time: 2026-06-09 18:19:28 UTC
Valid HTML 5 and Valid CSS