Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
HeliCoils and exhaust manifold... #744306 08/13/06 05:50 PM
Joined: Jul 2004
Posts: 34
W
Whatever Offline OP
Getting the Wheeling Fever
A couple years ago I had to HeliCoil the two rear holes in the head of my 22-RE for the exhaust manifold studs.I used the M10 x 1.25 (part #770-3020)HeliCoils. Well aparently they have finaly stripped out. What are my repair options? Can I go to the next size up safely? Any suggestions would be greatly appreciated. I'm wanting to get this done today (Sunday) so please reply a.s.a.p. if possible. Thanks in advance.

Re: HeliCoils and exhaust manifold... [Re: Whatever] #744307 08/13/06 10:49 PM
Joined: Oct 2005
Posts: 392
1
1986xtracab Offline
Mudrunner
I have heard of guys usind 7/16 coarse ones, there is also time-serts.

Re: HeliCoils and exhaust manifold... [Re: 1986xtracab] #744308 08/14/06 12:38 AM
Joined: Jul 2004
Posts: 34
W
Whatever Offline OP
Getting the Wheeling Fever
What are time-serts?

Re: HeliCoils and exhaust manifold... [Re: Whatever] #744309 08/14/06 12:48 AM
Joined: Oct 2005
Posts: 392
1
1986xtracab Offline
Mudrunner
http://www.timesert.com/

same idea as helicoils but they look like they would be more durable. I have never used these though.


Moderated by  4Crawler, 4x4Wire, kewlynx 







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5999 MB (Peak: 0.6550 MB) Data Comp: Off Server Time: 2026-05-29 16:20:34 UTC
Valid HTML 5 and Valid CSS