|
|
|
|
 wiringa electric brake controller
#745962
08/20/06 05:29 AM
|
Joined: Mar 2006
Posts: 58
OP
Getting the Wheeling Fever
|
can some one letme know what color the cold side of the brake signal is. I am adding a electric brake controller
|
|
|
Re: wiringa electric brake controller
[Re: jasen]
#745963
08/20/06 06:36 PM
|
Joined: May 2000
Posts: 3,281
Roll Me Over
|
I presume you mean to control the electric brakes on a trailer...
on a 7-connecter plug:
1-White = ground
2-Blue = Brakes power
3-Brown = Tail lights/Brake lights
4-Black = 12v power
5-Yellow = Left turn signal
6-Green = Right turn signal
7-Orange = Aux.
You might want to double-check that, though. (Google it)
Don `87 Mitsu 2dr, Rubicon survivor, GModified.
|
|
|
Re: wiringa electric brake controller
[Re: don]
#745964
08/21/06 04:08 AM
|
Joined: Mar 2006
Posts: 58
OP
Getting the Wheeling Fever
|
No I am looking for the color code under the dash that sends the power to the brake lights. This is needed to hook up the electric brake controller
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.5933 MB (Peak: 0.6467 MB) Data Comp: Off Server Time: 2026-06-10 06:14:22 UTCValid HTML 5 and Valid CSS 
