Extreme Terrain
4x4Wire Trail Talk Forums: Jeep, Toyota, Mitsubishi, Pajero, Isuzu, Kia, 4WD, 4x4, SUV, Off-Road and OutdoorWire Forums


Previous Thread
Next Thread
Print Thread
Rate Thread
Performance Camshaft #751646 09/14/06 04:11 AM
Joined: Mar 2005
Posts: 381
R
Roll_me_over Offline OP
Mudrunner
Does anyone make a performance cam for the 2.6 N/A motor? I know that TEP makes one but does anyone else offer a cam that has more lift and duration then the stock cam?


02 Ford F-250 4X4 PSD...zero body damage
67 Weimann 18' Jet boat...zero body damage except for the trailer drags on the ground from time to time
Re: Performance Camshaft [Re: Roll_me_over] #751647 09/14/06 05:00 AM
Joined: Feb 2004
Posts: 10,238
FrankR Offline
Web Wheeler
****
IPP

Frank


'89 [color:"white"]G-Raider[color:"white"] [color:"black"]Supercharged 3.0L, MegaSquirt 2, lockup A/T, 2.5" exhaust, 172k, Cibie H4s/Oscar SCs, Hella Micro DE fogs, Cobra CB, Superwinch hubs, LSD rear/Aussie Locker front, Bilsteins, Lifeline AGM, Rust-Oleum
Re: Performance Camshaft [Re: FrankR] #751648 09/14/06 08:50 PM
Joined: Apr 2004
Posts: 1,494
B
BobShaw Offline
Body Damage is Cool
Is IPP the ones that supplied John Baker with his performance cams? What about Calmini?


87 Raizer, 4.3V6, Mod TH700R4,231CHD, detroit rear and LSD front, bouncy seats, 2" lift and 32x15 BFG MT tires.
Re: Performance Camshaft [Re: BobShaw] #751649 09/15/06 03:56 AM
Joined: Jan 2001
Posts: 13,649
fasteddy Offline
Web Wheeler
*****
And the three initial place (RPW?) in Oz.


Not responsible for advice not taken...







4x4Wire Social:

| 4x4Wire on FaceBook |


OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.

Powered by UBB.threads™ PHP Forum Software 7.7.3
(Release build 20190728)
PHP: 7.4.33 Page Time: 0.006s Queries: 15 (0.004s) Memory: 0.6013 MB (Peak: 0.6566 MB) Data Comp: Off Server Time: 2026-06-09 21:34:29 UTC
Valid HTML 5 and Valid CSS