|
|
|
|
4.0 head swap
#753099
09/21/06 04:30 AM
|
Joined: Apr 2006
Posts: 11
OP
Need a Spot
|
What all do I need from the 4.0 to swap the head on a 258? I plan on using my intake or possibly going up to a 2 barrel intake with bbd. Also do I buy head gasket for 4.2 or 4.0?
 FrankenJeep J-10 80 body and frame 77 258 engine 79 th400 and bw1339 79 d44's with 3:54gears welded rear 36" Iroks on 15x10 rockcrawlers Soa and shackleflip
|
|
Re: 4.0 head swap
[Re: Thumpszilla]
#753100
09/21/06 11:33 AM
|
Joined: Mar 2004
Posts: 2,398
Body Damage is Cool
|
Head, valve cover, exhaust manifold. Use a 4.0 head gasket. Heads with 7120 casting numbers are said to give the biggest performance boost. Here's a link to one of many articles on the subject found online. I did it to my CJ using the 258 intake and a MC 2100 carb and loved it. <img src="/forums/images/graemlins/cheers.gif" alt="" /> 4.0 Head conversion
|
|
|
|
|
|
OutdoorWire, 4x4Wire, JeepWire, TrailTalk, MUIRNet-News, and 4x4Voice are all trademarks and publications of OutdoorWire, Inc. and MUIRNet Consulting.
Copyright (c) 1999-2019 OutdoorWire, Inc and MUIRNet Consulting - All Rights Reserved, no part of this publication may be reproduced in any form without express written permission
You may link freely to this site, but no further use is allowed without the express written permission of the owner of this material.
All corporate trademarks are the property of their respective owners.
PHP: 7.4.33 Page Time: 0.007s Queries: 15 (0.004s) Memory: 0.5881 MB (Peak: 0.6359 MB) Data Comp: Off Server Time: 2026-06-10 01:41:14 UTCValid HTML 5 and Valid CSS