This Heater hose broke...this was the origin of my Cylinder leak problem. no one has it here...the auto stores, or they won't try to order it. I finally found them at autoworld.com. my only problem is...they're are like 5 of them, I narrowed it down to 2, because the piece I had was one piece and all the others were 2 piece required.

below is the piece and of course on the website they listed 5 or six, some for the 3.0, some for 2.6.

does this go to:

PIPE TO INTAKE MANIFOLD
OR
HEATER TO PIPE 1

here is the picture of the hose, and the two connections on the car, one connections is under the carb, the hose connects and goes up in that "U" manner and then goes down and connect to the wall. the connection on the wall is upside down..so use your imagination, my arms are too big to get in there and angle, so i had to stick the digital deep and upside down.

thanks





also...does anyone know if its possible to get diagrams of each part like the parts dept has at mitsubishi?

Pipe to intake manifold. I think! give me an e-mail address yahoo, hotmail ect.. and I will e-mail you pics from the servive manual and parts manual. Don't know how to send pics on the wire e-mail address.